Type N thermocouple wire

Type K thermocouple wire is the most common thermocouple conductor(≥500℃), it has a good resistance against oxidation and can be recommended for oxidizing and inert atmospheres.Type K thermocouple wire can not be used in sulphurous and vacuum atmospheres directly at a high temperature,as this will have a significant impact on the EMF values. The composition of positive(KP) is Ni90Cr10, negative(KN) is Ni97Si3 for Type K thermocouple wire .

Type J thermocouple alloys is suitable for using in vacuum, oxidizing and reducing atmospheres or inert gas atmospheres. Because of high temperature oxidizing quickly for JP, the measuring temperature range is restricted. The composition of positive(JP) is Fe100, negative(JN) is Cu55Ni45 for Type J bare thermocouple wire .

Type T thermocouple wire is suitable for temperature below 0℃ with an upper temperature limit of 350℃(ASTM E230:370℃) and can be used in oxidizing and reducing atmospheres or inert gas atmospheres,The composition of positive(TP) is Cu100,negative(TN) is Cu55Ni45 for Type T thermocouple alloys . Here in SICC, we produce Type T thermocouple wire using the highest quality raw materials. A wide range of materials such as nickel and copper element and more are carefully sourced to make the best quality. Send us your inquiries today!

Type E Bare thermocouple wire develops the highest source voltage(EMF) per℃ for measuring tiny temperature shift,it is suitable in oxidizing or inert gas atmospheres up to 900℃(ASTM E230:870℃),  The composition of positive(EP) is Ni90Cr10, negative(EN) is Cu55Ni45 for type E thermocouple wire material. SICC is your one-stop solution providing Type E Bare thermocouple wire that will meet your needs, Contact us now for more inquiries!

SICC can supply Extension and Compensating bare thermocouple wire meet the standard IEC60584 and ASTM E230, The advanced melting skills combined controls the chemical composition to achieve the highest quality products , our produce base has the capacity of 900 tons annual that can meet your comprehensive requirements of tc extension wire . whatever the bright annealed or oxidized conditions,all thermocouple alloys are calibrated at our lab ,this includes the testing of EMF, chemical composition,physical and thermoelectric properties before shipment.

Type C thermocouple wire is a tungsten-rhenium alloy wire, and the material composition is tungsten-rhenium 5 &tungsten-rhenium 26 (WRe5-WRe26). The melting point of tungsten-rhenium thermocouple wire is 3120-3360℃, and it can be used up to 3000℃. It is the most high-temperature resistant metal thermocouple, and it has excellent characteristics such as high thermoelectric potential, high sensitivity, high temperature stability, oxidation resistance and corrosion resistance.

Type D thermocouple wire (WRe3-WRe25) is an ultra-high temperature measurement material designed for ultra-high temperature, strong corrosion, and high radiation environments (0~2300℃). It is widely used in cutting-edge fields such as nuclear energy, aerospace, and superconducting research. As China's leading Type D thermocouple alloy wire manufacturer, we always focus on providing high-performance temperature measurement solutions.

Mineral insulated thermocouple cable is used to insulate thermocouple wires from one another and from the metal sheath that surrounds them. Mineral insulated thermocouple cable has two (or four when duplex) thermocouple wires running down the middle of the tube. The tube is then filled with magnesium oxide powder and compacted to ensure the wires are properly insulated and separated. Mineral insulated thermocouple cable helps to protect the thermocouple wire from corrosion and electrical interference.