Standard Bellows Pressure Gauge

The Stainless Steel Industrial Pressure Gauge consists of a pressure-guiding system (including connectors, spring tube, etc.), a gear transmission mechanism, an indicating device, and a housing. All components are made of stainless steel. When the spring tube is subjected to the pressure of the measured medium, its end undergoes corresponding elastic deformation, which is amplified by the gear transmission mechanism and displayed on the dial by the indicating device. The Stainless Steel Industrial Pressure Gauge's housing is sealed, effectively protecting the internal components from environmental influences and contaminants. Furthermore, the oil filling inside the housing provides resistance to pressure fluctuations of the measured medium and severe vibrations in the operating environment, ensuring both corrosion resistance and shock resistance.

Type K thermocouple wire is the most common thermocouple conductor(≥500℃), it has a good resistance against oxidation and can be recommended for oxidizing and inert atmospheres.Type K thermocouple wire can not be used in sulphurous and vacuum atmospheres directly at a high temperature,as this will have a significant impact on the EMF values. The composition of positive(KP) is Ni90Cr10, negative(KN) is Ni97Si3 for Type K thermocouple wire .

Bimetallic thermometers are based on a bimetallic strip wound into a circular, curved shape. When one end expands due to heat, it drives the pointer to rotate, and the instrument displays the temperature corresponding to the thermoelectric potential. These Bimetallic thermometers can directly measure the temperatures of liquids, steam, and gases within a range of -80°C to +500°C in various production processes.

Mineral insulated RTD cable with Nickel conductors is the normal type for RTD cable for high temperature measurments up to 600C. The Mineral insulated RTD cable  are the base material for RTD sensors, its structure advantage with anti pollution and mechanical strength promise can be applied in the harsh environment.

Variable-diameter thermocouples are common temperature measurement elements，its special structure can greatly improve the response time. SICC can also customized Variable-diameter thermocouples based on your detailed specifications. Thus, meeting your project or business requirements. Send us your inquiries today!

Nickel chrome wire is a kind of non-magnetic alloy of nickel and chromium, it is widely used in heating elements. The maximum operation temperature of the heating elements is related to the wire diameter of Nickel chromium wire, it is better to choose thicker wires, the corrosive atmospheres also have a considerable relationship with the maximum operation temperature. The surface temperature of Nickel chromium wire is about 100C higher than the inner normally, when the operation temperature exceeds the limit, the oxidation of heating elements itself is accelerated, the heat resistance will be reduced, which is easily deformed,collapsed and even appreas to be broken, thereby shortening the service life of Nickel chromium wire.

We use mineral insulated RTD cable to make RTD probe and the probe can be assembly to different kinds of RTD Temperature SensorS. the specifications of RTD probe are from DIA1.5 to 8.0mm with Nickel,Copper,Constantan,etc. Here in SICC, we produce RTD probe using the highest quality raw materials. A wide range of materials such as tube,Mgo powder,bare thermocouple wire and more are carefully sourced to make the best quality. Send us your inquiries today!

The Mineral insulated heating cable are combined with heating conductors ,Mgo powder insulated and sheath material as a compact entirety. It has excellent mechanical strength and corrosion resistance.